Private Access
Français English Deutsch Español Türkçe Português Italiano Русский - Russian 中文 - Chinese
+33 (0)3 89 83 28 88

Transfer printing felts

Transfert printing feltThe Dollfus & Muller aramid felt is used on a heat transfer printing calender. Synthetic fabrics are usually printed on this calender using high temperatures (up to 230°C / 450°F). The pre-printed paper carries the dyestuffs, which are then sublimated on the fabric using high temperature. The purpose of the sublimation felt is to press the fabric against the printed paper, both against the heated drum. The contact between the fabric and the printed paper needs to be long enough, to ensure the transfer of the dyestuffs to the fabric. Heat transfer printing is an economical way to print synthetic fabrics.

 

 

 These machines can also be used for the following processes :

  • Laminating
  • Calendering
  • Placard transfer printing (banners).

For special applications, a silicone coating can be applied. Dollfus & Muller aramid felts are ideal for a high regularity transfer printing.

These Nomex felts are used on the following machines : Klieverik, Monti, Transmatic, Lemaire, Practix, Sorim, Studio FX, Stork, Bates, Wuppertal, Kristall, Sublistatic, Gessner, Bizmak, S.T.M., Singer, KMT, MOGK, TURAL MAKINA,...

 

 

ENDLESS FELTS FOR TRANSFER PRINTING CALENDERS
Description Recommended felts Characteristics
 Insight  Quality Fibres composition Maximum
working T° 		Thickness
(in mm) 		Weight
(in g/m²)
Standard quality

 FTIZ 251- FTIZ 281- FTIZ 303- FTIZ 353

 

 FTIZ 281 100% Aramid 230°C
450°F		 7,5 2800
The proven quality for Digital printers FTIZ 303 100% Aramid 230°C
450°F		 8 3000
The best quality for Digital printers FTIZ 353 100% Aramid 230°C
450°F		 9 3500

 

ENDLESS FELTS FOR LAMINATING CALENDERS
Description Recommended felt Characteristics
 Insight  Quality Fibres composition Maximum
working T° 		Thickness
(in mm) 		Weight
(in g/m²) 
Non sticking quality with a silicone
coating on the surface		   FTIZ SI 600 FTIZ SI 600 100% Aramid 230°C
450°F		 7 5000

 

CUT FELTS FOR PRESSES
Description Recommended felts Characteristics
 Insight  Quality Fibres composition Maximum
working T° 		Thickness
(in mm) 		Weight
(in g/m²) 
Thin standard quality   HZ 40 HZ 40 100% Aramid 230°C
450°F		 2 390
Medium thickness quality   ZS 200 -ZS 300 ZS 200 Aramid / Polyester 230°C
450°F		 8 2000
Thicker quality ZS 300 Aramid / Polyester 230°C
450°F		 12 3000