The Dollfus & Muller aramid felts are used on Textile compactors or calendering machines in Dyeing houses. Knitted fabrics need to be pre-shrunk and stabilized in order to avoid the subsequent shrinkage of the T-shirts or polos in washing machines.The compacting aramid felts facilitate this effect (this is why they can be called shrinking…
Textile felts and belts
For a better introduction of the knitted fabric and its shrinkage adjustment, Dollfus & Muller is supplying different kinds of PTFE-coated sheets (100% modified PTFE, or with Kevlar® and fibreglass fabrics) of all thicknesses which can be used on the compactors or tensionless dryers.Inside the Santex dryers, the PTFE-coated sheet is also…
More about the product
The Dollfus & Muller open mesh conveyor belts are used to dry, to shrink and to stabilize the fabric in tensionless & relax dryers.The fabric, which has been stressed during earlier processes (knitting, dyeing & squeezing), needs to be relaxed. This is usually achieved by agitating the fabric between two belts, either by hot air (…
More about the product
In order to have a better friction on the rolls, in order to open the fabric at the entrance of the processing machines, many different types of roll coverings can be used, either felted, smooth or slightly abrasive. Dollfus & Muller can supply you most of them.In knit dyeing houses, we offer specially roll coverings for compacting machines or…
More about the product
The Dollfus & Muller sanforizing felts are used on the Palmer unit of the compressive shrinking range or sanforizing machine. The sanforizing machine does for plain woven fabric what a compactor does for knitted fabrics : Pre-shrinking and stabilization. The difference comes from the fact that the shrinkage is not given by the felt, but…
More about the product
Dollfus & Muller is supplying conveyor belts for rotary, flat and inkjet printing dryers as well as felts for transfer printing.The Dollfus & Muller conveyor belts also called net, Aramid belts, conveyors or aprons, are used to carry the fabric through the printing dryers. The fabric, which has been printed, is fixed inside dryer with hot…
More about the product
The Dollfus & Muller aramid felt is used on a heat transfer printing calender. Synthetic fabrics are usually printed on this calender using high temperatures (up to 230°C / 450°F). The pre-printed paper carries the dyestuffs, which are then sublimated on the fabric using high temperature. The purpose of the sublimation felt is to press…
More about the product
Dollfus & Muller supplies cotton fabric belts for biscuit machines or rotatives (for instance, IMAFORNI or LASER machines).Cotton webbing has been very widely used in the production of biscuits throughout the world for several generations. Although many attempts have been made to develop other types of conveyor belting for the specialised…
More about the product
Dollfus & Muller supplies belts, mats and felts for various types of bakery machinery: baguette and croissant molds, shaping machines...Dollfus & Muller products guarantee enhanced durability and performance in the most demanding production environments.
More about the product
Dollfus & Muller supplies most of the spare parts of the Sanfor machines, such as the rubber belt, the Palmer felt , the felt pads, the steaming cylinder fabrics and the roll coverings.
More about the product